Description

The Dell™ PowerEdge™ M1000e Modular Blade Enclosure is the rock-solid foundation for Dell’s blade server architecture, providing an extremely reliable, flexible and efficient platform for building any IT infrastructure.The Dell PowerEdge M1000e Modular Blade Enclosure is a breakthrough in enterprise server architecture. Built from the ground up to combat data center sprawl and IT complexity.

Dell EMC PowerEdge M1000e Blade Enclosure in Hyderabad

  • Chassis
    Form Factor
    10U modular enclosure holds up to sixteen half-height blade servers
    44.0cm(17.3”)H x 44.7cm(17.6”)W x 75.4cm(29.7”)D
  • Weight
    Empty Chassis only – 98lbs (44.5kg) 
    Chassis w/ all rear modules (IOMs, PSUs, CMCs, KVM) - 176lbs (79.8kg) 
    Max Fully loaded w/ blades and rear modules - 394lbs (178.7kg)
  • Cooling Fans:
    M1000e Chassis comes standard with 9 hot pluggable, redundant fan modules

Based on Energy Smart Technologies, M1000e fans are a breakthrough in power and cooling efficiency.
The fans deliver low power consumption, but also use next generation “low flow” technology to ensure the 
lowest possible amount of fresh air is consumed to cool the enclosure

  • Input Devices:
    Front Control Panel with interactive Graphical LCD
  • Supports initial configuration wizard :
    Local server blade, enclosure, and module information and troubleshooting

Two USB Keyboard/Mouse connections and one Video connection (requires the optional Avocent iKVM switch
to enable these ports) for local front “crash cart” console connections that can be switched between blades
Power Up to six 3000W high-efficiency power supplies, six 2700W high-efficiency power supplies or up to six -48V DC 2700W power supplies.

Based on Dell’s Energy Smart technologies, the M1000e power supplies deliver greater levels of efficiency, even at low levels of utilization. Supported power supply

  • configurations include:
    3+3 and 2+2 (grid redundancy)
    2+1, 3+1, 4+2, and 5+1 (power supply redundancy)
    2+0 and 3+0 (non-redundant mode)

The M1000e chassis supports dynamic power supply engagement (DPSE) mode, which if enabled, puts lightly loaded power supplies into standby mode, driving up the utilization and the efficiency of the active supplies. Dell supports either 110–120V or 208–240V AC power supply input and supports a wide range of power distribution options. Dell recommends 208–240V AC for all production environments.
Storage

  • External Storage Options:
    For information about Dell external storage options, visit Dell.com/Storage.
    Management
  • 1 (standard) or optional 2nd (redundant) Chassis Management Controller(s) (CMC) that provide:
    Single secure interface for inventory, configuration, monitoring, and alerting for the chassis and all components Multi-chassis management capability allows up to nine chassis and 288 servers to be managed from a single, embedded, agent-less interface

Enables automated and embedded one-to-many blade BIOS and firmware updates, independent of the OS through iDRAC
Allows one-to-many blade server BIOS capture and replication
Real-Time Power/Thermal Monitoring and Management
Real-Time System AC Power Consumption with resettable peak and minimum values
System-level power limiting and slot-based power prioritization
Manages Dynamic Power Engagement functionality that can help to lower overall system power consumption by ensuring power supplies run at their optimal efficiency points
Manages fan speed control using Dell’s enhanced efficiency technologies to ensure fans are delivering optimal cooling while minimizing power consumption and airflow

  • Secure Web (SSL) and Command Line (Telnet/SSH) interfaces : 
    Supports multiple levels of user roles and permissions, including integration into MicrosoftActive DirectoryServices and Lightweight Directory Access Protocol (LDAP) services for authentication 2 x 10/100/1000Mb Ethernet ports + 1 serial port

Provides single point of connection from management network to iDRAC on each of the blades and the management interfaces on the integrated I/O modules
2nd Ethernet port supports daisy chaining of CMCs for improved cable management

  • Optional Integrated Avocentkeyboard, video and mouse (iKVM) switch:
    Enables USB keyboard/mouse and video port on front control panel
  • Dell OpenManage™ Systems Management :
    Dell OpenManage Server Administrator—monitoring agents and 1:1 management utilities

Dell OpenManage Essentials—discover, inventory, monitor, and update M1000e chassis and bladesIntegration with third-party management solutions through Dell’s Certified Partner Program Remote Management

  • Communications
    Brocade Switch M5424
    Enclosure I/O Modules
    Up to six total I/O modules for three redundant fabrics, featuring Ethernet FlexIO Switches providing
    on demand stacking and uplink scalability.
  • PowerConnect M6220 Ethernet Switch :
    Includes 4 x fixed copper 10/100/1000Mb Ethernet uplinks plus 2 of the following optional modules: 
    2 x 24Gb Stacking Ports
    2 x 10Gb Optical (XFP-SR/LR) uplinks
    2 x 10Gb copper CX4 uplinks
  • Standard Features include :
    Layer 3 routing (OSPF, RIP, VRRP)
    IPv6 support
    Layer 2/3 QoS
    Access Control Lists
  • Dell Ethernet Pass-Through Module :
    Supports 16 x 10/100/1000Mb copper RJ45 connections
    Only Ethernet Pass-through module on the market that supports full range of 10/100/1000Mb operation
  • BrocadeM4424 SAN I/O Module : 
    Access Gateway Mode or FC Switch
    Access Gateway Mode enables NPIV functionality on external ports which delivers enhanced fabric interoperability, simplified set up, and doesn’t consume an FC domain

12 or 24 port versions with 4 or 8 x FC 1/2/4Gb SFPs respectively : 
4Gb Fibre Channel Pass-Through Module
16 x FC 1/2/4Gb SFP ports

  • Availability: Available

Request a Callback

Enter your details in the form and we will call you back.

Success! Your request has been sent to us.
Error! There was an error sending your request.